

Hydraulic & Pneumatic Seals

Piston Seals
Piston seals maintain sealing contact in sliding motion between the piston and cylinder bore for hydraulic and pneumatic equipment.

Rod Seals
Rod seals is a general term describing the sealing system used for moving parts with reciprocal movement of hydraulic & pneumatic equipment.

Wiper / Dust Seals
The main feature of a dust seal is to seal outside dust. In addition, a sealing system; using a dust seal, combined with rod packing and buffer ring, can prevent oil film from being scraped out.

Buffer Seals
Buffer seal is used in combination with rod packing to absorb the impact of fluctuating pressure at high loads, to isolate high temperature fluid, and to improve the durability of the packing.

Vee Packings
Vee packings can be used for severe operating conditions by plying packings according to the operation pressure. Both packings for piston and rod seals are fabric reinforced and made of nitrile rubber.

Pneumatic Seals
Pneumatic seal are general terms describing sealing systems for low pressure. Pneumatic seals can be used for both piston and rod seals.

Center Joint Seals
Center Joint Seal is a special case for center swivel with excellent wear resistance and extrusion proof ability. Since perfect sealing cannot be expected, please provide a drain at the end and use oil seals for rotating pressure with the seal.

Floating Seals
Floating seals are used for the purpose of maintaining a steady flow of lubricating oil and preventing the infiltration of impurities.

Oil Seals
Oil seals are components of a machine that seals lubricants. Lubricants are used in friction - producing areas of a machine to ensure smooth movement and long life. Oil seals are used to prevent lubricants from leaking through bearing clearances of the machine.

Pin Seals
Pin Seals are dust seals for oscillating and rotating movement for hinge pin and bush. Pin seals can be used under severe dust conditions to improve the durability of equipment. Relief effect eases the process of draining used grease when filling up new grease.

Control Valve Seals
Control Valve Seals are special seals mainly used for valve units of industrial equipment. Control valve seals have excellent sealing ability and low friction.

Cylinder Seal Kits
Hydraulic cylinder seal kits for Boom, Arm, Bucket, Lift, Tilt, Steering, Track Adjuster, Center Joint, Control Valve, Pilot Valve, main pump, Gear Pump, Travelling Motor, Swing Motor and Reduction Devices.

Gear Pump Kits
Pump Kits are used for gear pumps, combined together with oil seal to prevent the oil leakage.

O Rings

O Rings/O Ring Kits
Cylinder Seal Kits
Hydraulic cylinder seal kits for Boom, Arm, Bucket, Lift, Tilt, Steering, Track Adjuster, Center Joint, Control Valve, Pilot Valve, Main pump, Gear Pump, Travelling Motor, Swing Motor and Reduction Devices.

Gear Pump Kits
Pump Kits are used for gear pumps, combined together with oil seal to prevent the leakage of oil.

Couplings
Pump couplings are used for generators, pump driving of excavators.

Bushings
Cylinder bushing or dry bearings have low coefficient of static and dynamic friction, good strength and dimensional tolerance. These dry bearings are applied to cylinders for a variety of industries and hydraulic systems.

Back Up Rings
Back Up Rings are rigid rings used to hold elastomeric seals to their designed shape. Back Up Rings are commonly used with O-rings, lip seals and as reciprocating shaft seals.

Wear Rings/Guide Rings
This is used as bearing of rod and piston to prevent its scoring or accentricity and to improve the durability of packing.

Pumps Units
Pump assembly for Hydraulic, Gear, and Transmission pumps.
Pump Assembly for Gear and Oil pumps.





.png)



